Any T-L pivot automatic shutdown safeties
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
6 listed for this panel. Tap one for the full explanation. These only apply to this panel. On a different panel the same code, light or message can mean something else.
There are no numbered codes for these. Which safety stopped the machine is worked out from the symptoms and the gauges.
All 6 automatic shutdown safeties
- Level Switch SafetyThe hydraulic oil level is too low, or the switch has failedStops the machine
- Pressure Switch SafetyHydraulic pressure is too low, or the switch has failedStops the machine
- Overwater Timer SafetyShuts down at steady intervals, usually because the end tower is stuckStops the machine
- Position Stop SafetyA position stop switch was triggeredStops the machine
- Water Pressure SafetyWater pressure is too low to run the systemStops the machine
- Engine FaultAn engine-driven system's safety has stopped the machineStops the machine
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.