Valley ClassicPlus status lights

An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.

5 listed for this panel. Tap one for the full explanation. These only apply to this panel. On a different panel the same code, light or message can mean something else.

This panel is designed to be read from the outside. The five lights on the front tell you most of what is happening without opening anything or using a meter.

All 5 status lights

• PANEL LightShows whether control power and the outgoing safety circuit are both okay›
• TOWERS LightShows whether the safety signal sent out has returned on the return circuit›
• END TOWER LightShows the panel is sending the end tower its signal to move, as the percent timer calls for›
• FORWARD LightShows the machine is currently set to run in the forward direction›
• REVERSE LightShows the machine is currently set to run in the reverse direction›

Safety

Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.

FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.