E03 on the Valley ICON 5 / ICON X

An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.

What it means

SOFTWARE RESET.

Logged every time the software resets, including normal power-ups. Does not shut down. The count should equal the number of times power has been toggled. A count higher than that means the panel is resetting on its own.

E03 on other panels

This page is for the Valley ICON 5 / ICON X. The same code on another panel can mean something else:

• Valley ICON 10 / ICON 1SOFTWARE RESET›
• Valley TouchPro · different meaningUnit resets: logged when the software resets›
• Valley Pro / Pro2 · different meaningUnit reset: logged whenever the software restarts›
• Valley Select2 · different meaningUnit resets: logged every time the module is power cycled›

Safety

Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.

FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.