Zimmatic 700C error codes
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
36 listed for this panel. Tap one for the full explanation. These only apply to this panel. On a different panel the same code, light or message can mean something else.
All 36 error codes
- 200STOPPED
- 201FORWARD
- 202REVERSE
- 301POWER DELAY
- 302WATER DELAY
- 303PRESSURE DELAY
- 304GPS DELAY
- 305ROTO-PHASE DELAY
- 308BARRIER HOLD
- 400LOW PRESSURE
- 401HIGH FLOW
- 402LOW FLOW
- 403SOFT BARRIER
- 404GPS LOST
- 405GPS DEAD RECKON
- 406CABLE ERROR
- 407LOW AUX PRES
- 500SOFT BARRIERStops the machine
- 501AUTO-SHUTDOWNStops the machine
- 502SERVICE STOPStops the machine
- 503LOAD CONTROLStops the machine
- 600STALL TIMEStops the machine
- 602GPS LOSTStops the machine
- 603LOW VOLTAGEStops the machine
- 604HIGH VOLTAGEStops the machine
- 605LOAD CONTROLStops the machine
- 606GPS REV ROTATEStops the machine
- 607GPS FENCEStops the machine
- 608LOW PRESSUREStops the machine
- 610PRESSURE TIMEStops the machine
- 611LOW AUX PRESStops the machine
- 613LOW TEMPERATUREStops the machine
- 618HIGH RAINStops the machine
- 620PLAN MISSINGStops the machine
- 700ALIGNMENTStops the machine
- 701DIRECTIONStops the machine
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.