Reinke RPM Connect panel lights

An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.

4 listed for this panel. Tap one for the full explanation. These only apply to this panel. On a different panel the same code, light or message can mean something else.

This panel is normally run through a connected online account. These four lights are what the panel face itself shows without opening anything.

All 4 panel lights

• SYSTEM POWER lightLit means the main control panel has power›
• SYSTEM SAFETY lightOff on a powered panel means the safety circuit is open›
• RUNNING FORWARD lightLit means the machine is currently traveling forward›
• RUNNING REVERSE lightLit means the machine is currently traveling in reverse›

Safety

Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.

FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.