Error codes, faults and lights on Reinke control panels

An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.

Pick your panel

RPM Connectpanel lights ›RPM Advanced Plusstatus colors and indicators ›RPM Touch Screenstatus colors and indicators ›RPM Preferredstatus colors and indicators ›

Panels often fitted to other makes

A Reinke machine can carry one of these instead of its original panel. Go by the name on the panel itself.

Valley ICON 5 / ICON Xerror codes ›Zimmatic FieldNET Pivot Controlerror codes ›Zimmatic FieldNET Pivot Controlindicator lights ›

Not sure which panel you have? The name is usually on the panel door, or on the screen when it powers up.

Safety

Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.

FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.