E25 on the Valley ICON 10 / ICON 1
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
What it means
GPS COORDINATES OUT OF RANGE.
It stops the machine only if the panel is set to shut down on it. Check that the Distance to GPS and the Radius plus and minus values are right, and check the pivot point coordinates. Another GPS device on the same channel can also cause it. Moving the GPS to a different power line carrier (PLC) channel avoids that, and your dealer can set that up.
E25 on other panels
This page is for the Valley ICON 10 / ICON 1. The same code on another panel can mean something else:
- Valley ICON 5 / ICON XGPS COORDINATES OUT OF RANGE
- Valley TouchPro · different meaningGPS coordinates out of range: check distance to GPS, or for crosstalk
- Valley Pro / Pro2 · different meaningGPS coordinates out of range: check distance to the GPS source, or crosstalk
- Valley Select2GPS coordinates out of range
- Valley Select · different meaningAnalog-to-digital converter fault
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.