E25 on the Valley Select
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
What it means
Analog-to-digital converter fault.
The analog-to-digital converter is the part of the panel that turns incoming sensor signals into readings the panel can use. On this panel, all four E codes usually trace back to the same place, the connections and the relay board supply inside the panel, so this code alone does not prove the converter itself is bad. It shows up in the voltage window, flashing back and forth with the voltage reading. The machine may keep running while it shows. That does not mean the code can be ignored. Note the exact code and pass it along when calling for service.
Call a technician for this one, rather than opening the panel.
E25 on other panels
This page is for the Valley Select. The same code on another panel can mean something else:
- Valley ICON 5 / ICON X · different meaningGPS COORDINATES OUT OF RANGE
- Valley ICON 10 / ICON 1 · different meaningGPS COORDINATES OUT OF RANGE
- Valley TouchPro · different meaningGPS coordinates out of range: check distance to GPS, or for crosstalk
- Valley Pro / Pro2 · different meaningGPS coordinates out of range: check distance to the GPS source, or crosstalk
- Valley Select2 · different meaningGPS coordinates out of range
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.