E07 on the Valley Pro / Pro2
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
What it means on the Pro2
Pressure sensor out of range high.
The panel does not trust the pressure reading, so this points at the pressure sensor or its connection, not the pump. A plugged sensor tube or ice against the sensor can cause it with nothing actually broken, most often in cold weather.
Call a technician for this one, rather than opening the panel.
What it means on the Pro
Pressure sensor out of range high: electrical connection.
E07 on other panels
This page is for the Valley Pro / Pro2. The same code on another panel can mean something else:
- Valley ICON 5 / ICON X · different meaningPRESSURE (mV) SENSOR OUT OF RANGE HIGH
- Valley ICON 10 / ICON 1 · different meaningPRESSURE (mV) SENSOR OUT OF RANGE HIGH
- Valley TouchProPressure sensor out of range high
- Valley Select2 · different meaningPressure sensor out of range high (above 4.5 volts): transducer has failed
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.