E26 on the Valley TouchPro

An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.

What it means

LOW TIRE PRESSURE.

E26 and E27 only exist on a machine fitted with tire pressure monitoring. If one of those shows on a machine you thought did not have that option, the option is fitted after all.

E26 on other panels

This page is for the Valley TouchPro. The same code on another panel can mean something else:

• Valley ICON 5 / ICON XLOW TIRE PRESSURE›
• Valley ICON 10 / ICON 1LOW TIRE PRESSURE›
• Valley Pro / Pro2Low tire pressure›

Safety

Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.

FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.