Low Pressure Shutdown at 0 on the Zimmatic AIMS Advance

An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.

What it means

A shutdown setting of 0 usually means this protection is switched off.

The panel treats a setting of zero as off. A low pressure shutdown set to 000 means that protection is turned off, so the machine will keep running even if the water pressure drops. The exception is a machine with a pressure switch, where the screen shows pressure as On or Off instead of a number. There, 000 with that On/Off reading is a normally set up, protected machine.

This is what it means on the Zimmatic AIMS Advance. On a different panel the same light or message can mean something else. Wrong panel? Pick another Zimmatic panel.

Safety

Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.

FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.