601 on the Zimmatic FieldNET Pivot Control
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
What it means
Low Pressure Shutdown: low pressure caused shutdown.
A 600-series code is a shutdown, but the panel may start the machine again on its own once the problem clears. Treat it as if it could start moving at any time. After a low pressure shutdown, only the pressure transducer at the panel can bring the machine back on its own when pressure returns. A transducer out at the end of the pivot loses power in this shutdown and cannot see the pressure come back, so it cannot trigger that restart.
This one stops the machine.
Reading the display and looking the machine over with every door and cover closed is fine. Anything past that means power shut off and locked out at the main disconnect first, and electrical checks belong to a dealer, an electrician, or someone qualified to be in the panel.
This is what 601 means on the Zimmatic FieldNET Pivot Control. On a different panel it can mean something else. Wrong panel? Pick another Zimmatic panel.
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.