Reinke RPM Preferred status colors and indicators

An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.

6 listed for this panel. Tap one for the full explanation. These only apply to this panel. On a different panel the same code, light or message can mean something else.

The main screen shows one of these status colors depending on what the system is doing.

All 6 status colors and indicators

• BLUE status colorBlue means the system is moving and applying water›
• GREEN status colorGreen means the system is moving without water›
• DARK GREEN status colorDark green means the system is moving and applying chemicals›
• RED BLINKING LINEA red blinking line means the system has had a safety shutdown
  Stops the machine
  ›
• Yellow position indicatorA yellow position box means something is wrong with the position reading›
• Plus sign (+) next to speed percentageA plus sign means the end tower is moving right now›

Safety

Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.

FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.