E14 on the Valley Pro / Pro2
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
What it means on the Pro2
Forward/reverse sense: possible short.
The panel saw the forward and reverse run lines both powered at the same time. It shuts the machine down, and the machine stays down until the error is cleared, so the cause has to be found first. Note where the machine was sitting when it happened and tell your dealer. At the end of field stop, it points at the auto reverse / auto stop setup. Anywhere else in the field, it points at induced voltage on the run lines or wiring.
Call a technician for this one, rather than opening the panel.
What it means on the Pro
Forward/reverse sense: possible short.
E14 on other panels
This page is for the Valley Pro / Pro2. The same code on another panel can mean something else:
- Valley ICON 5 / ICON X · different meaningFWD/REV SENSE POSSIBLE SHORT
- Valley ICON 10 / ICON 1 · different meaningFWD/REV SENSE POSSIBLE SHORT
- Valley TouchProForward/reverse sense: possible short
- Valley Select2Forward/reverse sense, possible short
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.