CLT Link light, off on the Zimmatic BOSS and Vision GPS position unit
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
What it means
Units are talking, but no GPS data is arriving.
CLT stands for control line transceiver, a communication board that talks over the machine's control line. There is one in the main panel and one in the GPS unit out on the machine. With the machine running, if the CLT Link light is off while the Com Fail light stays off too, the two boards are talking to each other but no GPS data is coming through. The problem sits out at the GPS unit on the machine. On a stopped machine the GPS unit has no power, so this light tells you nothing until the machine is running.
Call a technician for this one, rather than opening the panel.
This is what it means on the Zimmatic BOSS and Vision GPS position unit. On a different panel the same light or message can mean something else. Wrong panel? Pick another Zimmatic panel.
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.