CLT Link light, solid on the Zimmatic BOSS and Vision GPS position unit

An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.

What it means

Normal: the two units are talking and GPS data is arriving.

CLT stands for control line transceiver, the communication board in the main panel. A solid CLT Link light means it is talking to the GPS unit out on the machine and GPS data is arriving. This is the normal state and nothing needs fixing. The light is on a board inside the main panel, so do not open a live panel just to look at it.

This is what it means on the Zimmatic BOSS and Vision GPS position unit. On a different panel the same light or message can mean something else. Wrong panel? Pick another Zimmatic panel.

Safety

Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.

FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.