Zimmatic BOSS and Vision GPS position unit status lights
An independent guide from FixMyPivot, not from the manufacturer. Brand and panel names are here only so you can find your own equipment.
11 listed for this panel. Tap one for the full explanation. These only apply to this panel. On a different panel the same code, light or message can mean something else.
The GPS unit out on the machine only has power once the machine is started and its safety circuit is powered, so a dark light on that unit with the machine stopped is normal, not a fault.
All 11 status lights
- GPS status lamp, solidPosition fix with correction signal
- GPS status lamp, slow flashPosition fix without the correction signal
- GPS status lamp, fast flashNo position yet, normal right after start-up
- GPS light inside the panel, blinkingDistance from the pivot point is out of range, a settings problemCall a technician
- GPS + SBAS lights, offNo GPS data reaching the main panel from the GPS unitCall a technician
- 485 Link lightShould stay solid on, off means the link to the panel's controller is downCall a technician
- Config lightShould stay solid on, off means a GPS setting is missing or out of rangeCall a technician
- CLT Link light, solidNormal: the two units are talking and GPS data is arriving
- CLT Link light, offUnits are talking, but no GPS data is arrivingCall a technician
- Com Fail lightOff is normal, blinking red means communication is failingCall a technician
- All lights unlitA GPS communication board has no powerCall a technician
Safety
Center pivots run on high voltage and heavy moving machinery. Shut off and lock out power at the main disconnect before you open a panel or touch anything electrical. If you are not sure, stop and call your local pivot dealer or a licensed electrician. These pages tell you what a code means. They do not replace a qualified technician, and the safety instructions that came with your equipment come first.
FixMyPivot is an independent troubleshooting service. It is not affiliated with, authorized by, or sponsored by any equipment manufacturer. All brand, panel and product names are trademarks of their owners and are used here only to identify the equipment a code appears on. This information is general, is provided as is without warranty, and may not match the software version on your panel. Use of these pages is subject to our Terms of Service.